Office-Imaging-Systems-2016.jpg

Home | About Us | Contact Us | Office Equipment | Repair Rates | Resources | Toner Supplies

Sharp copiers error code messages

Sharp copiers error code messages

Sharp-AR series copier error messages:
 
*_*
Auditor not ready 

C1
v      Sub code 00: Charge corona problem 

C2
v      Sub code 00: Transfer corona problem 

CE
Applies to *7* models
v      Sub code 00: Communication problem with network cable
v      Sub code 01: Communication error with print server card
v      Sub code 02: Mail server or FTP not found
v      Sub code 03: Server does not correspond during image transmission
v      Sub code 04: Entered account number of FTP server or password not good
v      Sub code 05: FTP server entered directory is not good EE
v      Sub code EL: Problem during developer calibration, over toned
v      Sub code EU: Problem during developer calibration, under toned 

E7
v      Sub code 00: ICU-PCU communication problem
v      Sub code 01: Image data memory problem
v      Sub code 02: Laser problem
v      Sub code 03: Hard drive problem
v      Sub code 10: Black correction shading problem from CCD
v      Sub code 11: White correction shading problem from CCD
v      Sub code 13: Exposure lamp light amount adjustment incorrect
v      Sub code 90: ICU-PCU communication problem 

FA
v      Sub code 01: A2 board problem (Memory) 

FC
v      Sub code 00: ASK/lrDA modulation LSI reset error
v      Sub code 01: ASK/lrDA switch error 

F1
v      Sub code 00: Communication error between main board and finisher
v      Sub code 01: Finisher jogger shift problem
v      Sub code 02: Finisher transport drive
v      Sub code 04: Finisher index lower limit problem
v      Sub code 05: Finisher index upper limit problem
v      Sub code 06: Finisher shift problem
v      Sub code 08: Finisher stapler shift motor problem
v      Sub code 10: Stapler problemv      Sub code 11: Pusher motor problem
v      Sub code 14: Stack tray problem
v      Sub code 15: Finisher elevator motor problem
v      Sub code 16: Staple sorter holding motor
v      Sub code 17: ST pressure release home position problem
v      Sub code 18: Tray 3 exit paddle problem
v      Sub code 50: Non-support trouble in option connection
v      Sub code 80: Finisher power problem 

F2
v      Sub code 00: Toner sensor
v      Sub code 02: Toner motor disconnected
v      Sub code 31: Process control problem, drum or sensor not working properly
v      Sub code 32: Drum mark sensor problem, drum or sensor
v      Sub code 37: Drum mark sensor gain adjustment problem
v      Sub code 39: Processor unit thermistor (Not Fuser) 

F3
v      Sub code 12: Upper cassette lift problem
v      Sub code 22: Lower cassette lift problem 

F9
v      Sub code 00: ICU-PRT problem
v      Sub code 01: PRT DRAM problem
v      Sub code 03: Network card problem
v      Sub code 04: Printer program error
v      Sub code 10: PRT SCSI LSI problem
v      Sub code 90: ICU-PRT problem 

Note: In codes E7, F9, U0 the following sub codes all have the same meanings:
Sub code 82, 83, 84, 85, 86, 8L, 87, 88, 89, 8H, 8C, 8U, 8F, 90, 91 Communication error between main board and sub board, operation board, ICU board or PRT 

H2
v      Sub code 00 & 01: Fuser thermistor open  

H3
v      Sub code 00 & 01: Fuser temperature too high 

H4
v      Sub code 00 & 01: Fuser temperature to low, check fuser assembly

H5
v      Sub code 01: Exit sensor problem
v      Sub code 02: Fuser thermistor problem 

L1
v      Sub code 00: Scan forward problem, motor, sensor, board 

L3
v      Sub code 00: Scan return problem, motor, sensor, board 

L4
v      Sub code 01: Drive problem, main motor, gear, sensor, bind 
v      Sub code 02: Drum Drive Problem
v      Sub code 03: Fuser Fan Problem
v      Sub code 04: Developer Motor
v      Sub code 06: Transfer Belt Separator Motor
v      Sub code 30: Controller Fan
v      Sub code 31: Paper Exit Fan Problem


L6
v      Sub code 10: Laser problem, motor, sensor, board 

L8
v      Sub code 01: No full wave signal (PCU)
v      Sub code 02: Full wave signal problem (PCU)
PC
Personal counter missing 

PF
v      Sub code 00: RIC copy inhibition signal received from host computer 

U2
v      Sub code 00: EEPROM read/write problem
v      Sub code 11: Counter check sum error
v      Sub code 12: Adjust value check sum error 

U4
v      Sub code 02: Duplex alignment plate out of position, motor, cable, sensor
v      Sub code 03: Duplex rear plate problem 

U5
v      Sub code 00: Communication problem between main board and document feeder
v      Sub code 01: Document feeder resist sensor problem
v      Sub code 02: Document feeder invert / eject sensor
v      Sub code 03: Document feeder timing sensor
v      Sub code 06: Document feeder post separation sensor problem
v      Sub code 07: Document feeder read sensor problem
v      Sub code 08: Document feeder SB sensor problem
v      Sub code 11: Document feeder paper feed drive problem
v      Sub code 16: Document feeder fan problem 

U6
v      Sub code 00: Desk communication problem
v      Sub code 01-03: Desk lift problem
v      Sub code 08: Desk 24 volt power supply
v      Sub code 09: LCT lift motor problem
v      Sub code 10: Desk transport error
v      Sub code 20: LCT communication problem
v      Sub code 22: LCT 24 volt problem
v      Sub code 50: Non support trouble in auto detect of desk
v      Sub code 51: Non support trouble in auto detect of LCT 

U7
v      Sub code 00: RIC communication problem (ICU board) 

U9
v      Sub code 00: Communication problem (ICU detect)
v      Sub code 90: Communication problem; ICU-OPE 

Sharp AR-M350 / 450 series also applies to Imagistics IM3510 IM4510 

C1
v      Sub code 00: Charge corona problem 

CE
v      Sub code 00: Miscellaneous e-mail related error
v      Sub code 01: Network interface card problem
v      Sub code 02: FTP error or can’t find mail server
v      Sub code 03: Server down during scan
v      Sub code 04: Invalid account name or password for FTP server entered
v      Sub code 05: Invalid FTP server directory enteredCHDoor open
v      Sub code 00: Developer cartridge unit missing
v      Sub code 01: Toner cartridge missing EE
v      Sub code EL: Problem during developer calibration over toned
v      Sub code EU: Problem during developer calibration under toned 

E6
v      Sub code 10: CIS problem (Black correction)
v      Sub code 11: CIS problem (White correction)
v      Sub code 14: CIS-ASIC communication problem 

E7
v      Sub code 02: Laser problem
v      Sub code 03: Hard drive problem
v      Sub code 06: Control board decode problem
v      Sub code 10: Shading problem (Black correction)
v      Sub code 11: Shading problem (White correction)
v      Sub code 14: CCD-ASIC communication problem
v      Sub code 50: Laser connection
v      Sub code 80: Scan board communication problem
v      Sub code 90: PCU communication problem 

F1
v      Sub code 00: Communication error with finisher or mail bin stacker
v      Sub code 02: Mail box stacker drive motor problem
v      Sub code 03: Console finisher paddle motor
v      Sub code 06: Console finisher slide motor
v      Sub code 08: Finisher stapler shift motor problem
v      Sub code 10: Finisher or console finisher stapler problem
v      Sub code 11: Finisher or console finisher bundle motor problem
v      Sub code 12: Mail box gate
v      Sub code 15: Finisher or console finisher lift motor problem
v      Sub code 19: Finisher or console finisher front alignment motor problem
v      Sub code 20: Finisher or console finisher aligning motor problem
v      Sub code 30: Console finisher communication problem
v      Sub code 31: Console finisher fold problem, sensor
v      Sub code 32: Console finisher punch communication problem
v      Sub code 33: Console finisher side punch motor register
v      Sub code 34: Console finisher punch motor
v      Sub code 35: Console finisher side punch motor register sensor
v      Sub code 36: Console finisher punch timer sensor
v      Sub code 37: Console finisher RAM
v      Sub code 38: Console finisher punch RAM
v      Sub code 80: Finisher or mail box 24 volt problem
v      Sub code 81: Console finisher transport motor
v      Sub code 87: Finisher stapler rotate motor 

F2
v      Sub code 00: Toner sensor
v      Sub code 02: Toner problem
v      Sub code 04: Wrong cartridge, destination or life cycle
v      Sub code 05: CRUM problemSub code 39: Process unit thermistor (Not Fuser)
F3
v      Sub code 12: Tray 1 lift problem
v      Sub code 22: Multi purpose lift problem 

F6
v      Sub code 00: Fax communication problem
v      Sub code 01: Fax flash ROM problem
v      Sub code 04: Fax modem problem 

F7
v      Sub code 01: Fax board EEPROM read/write error 

F9
v      Sub code 02: Centro port error (Control Board)
v      Sub code 03: Network card problem (Control Board)

H2
v      Sub code 00: Fuser thermistor for HL1 open
v      Sub code 01: Fuser thermistor for HL2 open 

H3
v      Sub code 00: HL1 fuser temperature too high
v      Sub code 01: HL2 fuser temperature too high 

H4
v      Sub code 00: HL1 fuser temperature too low, troubleshoot!
v      Sub code 01: HL2 fuser temperature too low, fuser assembly 

H5
v      Sub code 01: Exit sensor problem 

L1
v      Sub code 00: Scan forward problem 

L3
v      Sub code 00: Scan return problem 

L4
v      Sub code 01: Drive problem, main motor, gear, sensor, bind
v      Sub code 02: Drum drive motor problem 

L6
v      Sub code 10: Laser problem, motor, sensor, board 

L8
v      Sub code 01: No full wave signal problem (PCU)
v      Sub code 02: Full wave signal problem (PCU) 

PC
Personal counter missing PFRIC copy inhibition signal received from host computer. Hint Reset 17   

U1
v      Sub code 01: Fax board battery problem
v      Sub code 02: RTC read problem (Fax or ICU board) 

U2
v      Sub code 00: EEPROM read/write problem
v      Sub code 11: Control board EEPROM adjust value check sum error
v      Sub code 12: Control board EEPROM adjust value check sum error
v      Sub code 80: Scanner EEPROM
v      Sub code 81: Scanner memory check sum error
v      Sub code 90: PCU EEPROM read/write problem
v      Sub code 91: PCU memory check sum problem
v      Hint reset 16 U6
v      Sub code 00: Desk or LCT communication problem
v      Sub code 01-03: Desk or LCC multi-purpose tray lift problems
v      Sub code 10: Desk or LCC transport motor 

U7
v      Sub code 00: MODEM –PC problem

Enter content here

Sharp copiers error code messages
Home  ι   About Us  ι   Contact Us  ι   Copier & Printer Repair  ι   Copiers & Printers Sales  ι  Special Promotions  ι   Resources  ι Toner Cartridges
Brother, Canon, CopyStar, HP, Kyocera Mita, Lanier, Lexmark, Ricoh, Samsung, and Sharp Sales, copier and laser printer repairs in Utah, toner supplies for copiers, laser printers, fax machines, and MFP in Salt Lake County, Utah County, Park City, Utah.
copier repair in SLC, Utah. printer repair in SLC, Utah.

* 5211 South Green Pine Drive  Murray, UT 84123  * USA * Office:(801)506.0277 *
Copyright © Office Imaging Systems 2004, All rights reserved. Individual brands are copyrighted by their respective owners.
 Powered by 1FORCE 9.8m/s²